Effects Of Leaving Failing House Foundations Untreated.


House foundations shift due to a number of reasons. Most of the time it has to do with the soil that is beneath the foundation. When this happens, the house starts to show signs of a failing foundation.

This is a problem that should not be ignored. When soil settles beneath the house, it causes the foundation to crack. These cracks can often lead to the collapse of the house. Leaving the foundation un repaired could cause damage to the entire house, not to mention pose a risk to your life.

A weak foundation should be repaired immediately to ensure the walls do not cave in. This is risky because the entire house could collapse when a person or pet is inside. Additionally, all the property will get damaged and this will be costly.

Apart from that, when a failing foundation is not repaired, it gets more damaged. This means that you will have to spend more money eventually to fix the entire foundation. The situation only gets worse with time. It is best to save funds by fixing the cracks earlier on.

Crack sin plaster

Even when the foundation is getting damaged at a slower rate, do not be fooled into thinking that it will not affect you. You may decide to sell the house a few years down the line. A damaged foundation will lower the cost of your home noticeably. The value of the house drops due to the repairs that will need to be made.

Another terrible effect of leaving a failing foundation un repaired is that if there are cracks, you will be prone to water damage during the rainy season. The cracks will let in water and your belonging will be damaged.

If you have a failing foundation, ensure that you call us a soon as possible.

Cracks in bricks


How To Tell When You Need To Repair Your Home’s Foundation

If you have a home, then you need to know what to watch out for when it comes to its foundation. There are repairs that can be done no matter what condition the foundation is in, but the earlier you take care of problems the easier they will be to take care of.

Are your windows on hard to open now or have they been sticking as of late? Any sudden change with your windows could be due to a foundation issue. You should also look around your home for cracks over your doorways, where walls are meeting your ceiling, and on walls. Another place that cracks can appear would be on your floor.

Cracks in plaster walls.

Puddles can be a sign of moisture getting into the foundation if you see them in crawl spaces. If your foundation’s perimeter is having drainage issues, you may have a little bit of a problem. This is one reason why you need to keep gutters clean, because they can keep water away from the foundation.

Horizontal cracks are something you have to watch out for carefully. Soil can get saturated in water, and then may expand if it freezes. If that happens and it pushes on the foundation too hard it will cause the foundation to break. This may mean it’s too late for your foundation because severe damage like this is not going to be easy to fix. However, there are experts that can completely replace what you have so you can save your home.

Do not delay when you notice any of the issues that were outlined here. Foundations are not going to be perfect and the sooner you notice issues the better. Check over your home on a regular basis and the early warning signs should be easy to detect.

Cracks in plaster above doorway

All You Need To Know About Reblocking


Are you planning to take on a home improvement project? Before you begin, it’s wise to check the integrity of your home’s foundation first. A solid design and laser-perfect levels are required to ensure the overall durability of a home. Over time, however, the timber stumps that support your home may suffer from wear and tear. This causes the piers to sink. Timber stumps that have rotten can make the problem even worse. In such a case, a reblocking project is in order to strengthen the foundation of your home.

What Is Reblocking?

Reblocking is the process of replacing timber stumps with stronger and more durable concrete or steel stumps. This is commonly done on weatherboard homes and brick homes. These types of houses usually have timber stumps underneath. As timber stumps rot, their tips get pointed, causing the weight of the house to bear down on the stumps and the levels to be uneven.

Sub floor levelling

When To Reblock?

There are telltale signs that indicate you need to reblock the foundation of your home. If you notice any of the following, it’s time to call in a reblocking specialist:

-Slanting floors

-Difficulty opening or closing windows and/or doors

-Cracking tile floors

-Moisture in foundation

How Is It Done?

The process begins with a visual inspection. A reblocking expert scratches away the soil from the stump’s base to evaluate its condition. This involves the removal of plinth boards. Jacks are placed around the house to provide support during the removal process.

Weather Board home getting new stumps

Holes are dug to reach the plate. After this, the actual removal of timber stumps commences. New stumps are hung over the holes, leaving ample space for concrete. Special equipment is used to ensure that the house has a perfectly straight level. The concrete is then poured into the holes. The jacks are removed 24 to 48 hours to allow the concrete to set.

Restumping A House And What It Involves.


One of the processes of building a foundation involves placing concrete or wooden posts in the soil beneath the foundation. Holes are dug and these posts are placed below the material that is used for the foundation.

With time the soil beneath the foundation settles. When this happens, the posts which are also referred to as stumps, may move. This causes damage to the foundation. It develops cracks and the entire house is at risk of being unstable. Wooden stumps can also rot after being in the soil for a while thus resulting to the need for restumping.

So how is the process done? For wooden posts or stumps, a hole is dug next to the post. This hole is tiny about six inches wide. This will provide room for the contractors to check whether the post has rotted. If this is the case, the foundation is supported by use of machines. The posts are then repaired or replaced if the damage is too much.To know whether the posts have rotted away, the contractor pierces the wood to see if it will give in. If it does, it is an indication that it needs replacement.

For concrete stumps, the signs of damage are harder to spot. If you are careful though, you will see them in the foundation or the windows and door frames. If there is damage to the concrete posts, it is repaired by adding a new layer of concrete on the post to make it stronger.

Concrete Stump attached to bearer.

Naturally, the stumps made from concrete last longer because wood rots quickly especially in wet soils. It is therefore advisable to choose concrete stumps for your foundation. Furthermore, after the restumping, ensure the walls or the foundation itself is not damaged. You can have the contractors check on this.

Underpinning a Building

Underpinning a Building

Underpinning is a procedure used to stabilize a building that has a failing foundation. The most common reason for a failing building foundation is deterioration of the supporting wooden structure. The wood may begin to fail when it is exposed to moisture over time, or termites damage could also be the reason. In any case, the foundation must be repaired or the building will eventually collapse.

There are other possible reasons that a building needs underpinning, some of the reasons being that an additional story is being added to the existing structure, the building has moved due to a natural disaster or the supporting foundation soil has changed.

The first step required in the underpinning process is providing a permanent stable surface on which to place screw piles. The underpinning supports should only be placed under load bearing walls, beginning at the four corners of the structure and advancing inward. The recommended size of the concrete support is 3 feet long by 2 feet wide at a depth of at least 2 feet. The concrete must set up for a minimum of two days to ensure it has cured properly and is strong enough to support screw piles and the weight it supports.

Holes for underpinning

Underpinning brackets must be used to ensure the screw pile remains securely in place as it is used to raise the foundation to its former position. In certain cases screw caps are used to connect the pilings to a reinforced concrete beam.

Any time the foundation of a building begins to fail, it is necessary to consult with a structural engineer to determine which method of underpinning is recommended. If proper corrective measures are taken before too much damage has occurred, a building can be stabilised and remain usable for many years.

Concrete vibrated for footing